Course Catalogue

A nationally recognised training course accredited under the National Standards for Registration and the Australian Qualifications Framework designed for people who are responsible for drug and alcohol screening or collection in the workplace, and those wishing to learn more about drug and alcohol screening procedures.   

This course deals with the skills and knowledge required to provide an advanced first aid response, including management of the incident and other first aiders, until the arrival of medical or other assistance.


 

Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in confined spaces and operate respiratory protective equipment as per AS/NZS 2865:2009 (Confined Spaces). This training is suitable for employees who are required to enter confined spaces for maintenance, servicing or vessels etc with an irrespirable atmosphere.   

Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to safely use and operate respiratory protective equipment. This training is suited to all personnel required to wear respiratory protective equipment because they are working in a confined space or an irrespirable atmosphere.

 

Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to safely use and operate single or multi-gas detection instruments. This training is suitable for any personnel required to enter areas where there is a risk of atmospheric hazards.

Pre-requisites
Nil
 

Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in confined spaces as per AS/NZS 2865:2009 (Confined Spaces). This training is suitable for employees who are required enter confined spaces for maintenance, servicing or vessels etc.   

 

Refresher Course. Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in confined spaces as per AS/NZS 2865:2009 (Confined Spaces). This training is suitable for employees who are required enter confined spaces for maintenance, servicing or vessels etc.

Pre-requisites
Must have completed confined space with gas test atmospheres initial course and present proof of attainment.
 

Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in confined spaces and operate respiratory protective equipment as per AS/NZS 2865:2009 (Confined Spaces). This training is suitable for employees who are required to enter confined spaces for maintenance, servicing or vessels etc with an irrespirable atmosphere.

Pre-requisites
MSMPER200 Work in accordance with an issued permit is the pre-requisite for MSMPER205 Enter confined space. The assessment activities integrate all unit requirements and all competencies must be achieved before a statement of attainment is issued.
 

Refresher. Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in confined spaces and operate respiratory protective equipment as per AS/NZS 2865:2009 (Confined Spaces). This training is suitable for employees who are required to enter confined spaces for maintenance, servicing or vessels etc with an irrespirable atmosphere.

Pre-requisites
Must have completed confined space with breathing apparatus initial course and present proof of attainment.
 

Our Dangerous Goods (TLILIC0001 - Licence to transport dangerous goods by road)  course covers all aspects of the ADG Code together with relevant legislation, including Dangerous Goods classifications, placarding, stowage/load restraint, segregation and compatibility, emergency procedures and licencing requirements. In addition, it covers the responsibilities of drivers, consignors, owners and other personnel involved in the transport of dangerous goods

This training course is designed to teach employees what safe and active fire prevention is, and how to respond to a fire if one should occur. It also covers emergency evacuation procedures and how to assess whether you should tackle a fire yourself or not.

This programme has been developed for personnel required to respond to an emergency situation and act as a member of a workplace emergency control organisation. The unit of competency is not industry specific and can be adapted to suit all workplaces.

Pre-requisites
Nil
 

This training program provides candidates with the skills and knowledge required to make decisions about people’s safety during a workplace emergency and to give instructions and lead the emergency control organisation. This program has been developed for personnel that have been designated as the emergency control organisation’s Chief Warden.


 

This program has been developed for personnel who may be required to undertake first response to small workplace emergencies. The unit of competency is not industry specific and can be adapted to suit all workplaces. This program covers a range of emergencies that could be expected in the workplace using initial response equipment, including small fire, chemical and liquid spills.


 

This course provides the skills and knowledge required to provide a first aid response to a casualty and describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.

Pre-requisites
Pre-reading and a pre-assessment must be completed prior to attending the course.
 

The HLTAID008 - Manage first aid services and resources course provides the skills and knowledge required to establish, maintain and facilitate the provision of appropriate first aid in the workplace.

Specific licensing requirements relating to this competency, including requirements for refresher training, should be obtained from the relevant state/territory Work Health and Safety Regulatory Authority.

The Occupational first Aid course is a national skills set (HLTSS00027 - Occupational first aid skill set) which provides a set of skills to establish, maintain and facilitate the provision of appropriate first aid in a workplace environment, including the skills to provide an emergency first aid response in the event of an emergency.

Our nationally accredited Perform rescue from a Live LV Panel (UETTDRRF06B) course will provide participants with the skills and knowledge to effectively respond to an electrical emergency using a low voltage rescue kit and perform CPR on a casualty who has stopped breathing. Suitable for electricians needing a CPR/LVR certificate.

 

Baseline's Hazardous Area Awareness course covers environments where gases, vapours, mists and dusts occur in dangerous quantities. These areas are then classified as hazardous areas and requiring precaution by those who operate in these areas. People need to be  adequately protected and trained, so as to reduce the likelihood of the ignition of an explosive atmosphere. (Non-Accredited Training)

Baseline's Hazardous Area Awareness course including MSMWHS217 - Gas test atmospheres covers environments where gases, vapours, mists and dusts occur in dangerous quantities. Utilising knowledge gained from using a Gas Test Atmosphere These areas are then classified as hazardous areas and requiring precaution by those who operate in these areas. People need to be  adequately protected and trained, so as to reduce the likelihood of the ignition of an explosive atmosphere. 

This introductory workshop will provide participants with an awareness of the necessary requirements to perform tasks safely at heights including fall protection equipment, risk management, Legislative obligations and Australian / New Zealand Standards.

Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to safely work at height or depth utilising various forms of fall protection. This training is suitable for any personnel required to perform tasks from heights or depths and is compliant to AS/NZS1891 Industrial fall-arrest systems and devices. This course complies with the core training & assessment elements for a height safety operator.   

Participants who have previous experience in working at heights (obtained RIIWHS204D) and who wish develop an ability to perform a tower rescue.  Within this course the skills and knowledge to participate in rescue operations as a member of a rescue team and support specialist rescue operations will be explored in conjunction with providing emergency care pending the arrive of appropriately qualified personnel.  
 

A Health and Safety Representative (HSR) is the person elected by members of a work group within a business, or across a number of businesses to represent that work group during consultation on work health and safety issues.

Developed in conjunction with industry experts Advantage Injury Management Services (AIMS), this training course is designed to teach employees how to correctly identify, plan, and perform manual handling tasks in and looks in detail at the effects of improper manual handling.

Through the combination of theory and practical training‚ this course provides participants with the necessary knowledge and skills to understand the requirements of the Permit to Work (PTW) system and maintain safe conditions for workers carrying out tasks under a permit on a wellsite.


 

Through the combination of theory and practical training‚ this course provides participants with the necessary knowledge and skills to understand the requirements of the Permit to Work (PTW) system and maintain safe conditions for workers carrying out tasks under a permit on a wellsite.

Pre-requisite Requirements
Nil
 

All personnel involved in maritime and port security activities are required by law to undertake training to comply with the Maritime Transport and Offshore Facilities Security Regulations 2003. ( Regulation 1.25(4)(b) and Regulation 3.115)

Baseline Training Pty Ltd offers a practical 2-day specialised Port Facility Security Officer
(PFSO) Training Program tailored to Australian Legislation and the specific needs of staff working in Australian Ports and Port Facilities. Baseline also offers a half-day refresher course designed to get PFSO delegates up to speed with your knowledge and any changes to the legislation since initial training.

GIQ Coal Surface (Standard 11) – Full Course
The Standard 11 course provides training and assessment for the Resources and Infrastructure Industry (RII) Units of Competency which are specified in Recognised Standard 11, Training in Coal Mines Qld Coal Mining Safety and Health Act 1999. It will provide experienced and inexperienced workers with a pathway to enter into the mining industry.

Baseline's Standard 11 refresher course provides participants with the skills and knowledge required to continue to work on a surface coal mine site across Queensland. The course provides participants knowledge across the six key competencies refreshing the common safety practices of Coal Mines.

Through the combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to safely operate vehicles in the field including remote locations under a range of conditions. This unit is suitable for personnel who may be required to patrol areas across a variety of terrains looking for problems which require maintenance or reporting.

Pre-requisites
Nil

CPCCWHS1001 - Prepare to work safely in the construction industry course contains the unit of competency specifies the mandatory work health and safety training required prior to undertaking construction work. The unit requires the person to demonstrate personal awareness and knowledge of health and safety legislative requirements in order to work safely and prevent injury or harm to self and others. It covers identifying and orally reporting common construction hazards, understanding basic risk control measures, and identifying procedures for responding to potential incidents and emergencies. It also covers correctly selecting and fitting common personal protective equipment (PPE) used for construction work.

Baseline Training and Consulting is proud to offer the AVI30316 Certificate III in Aviation (Remote Pilot- Visual Line of Site) which has been developed in partnership with Australia's National Drones Institute, a fully operational and successful commercial national drone’s organisation. The program has been designed in line with the competencies developed by the Aviation Service Skills Organisation and is the highest qualification available for those who wish to enter the remote aircraft industry to operate drones for commercial purposes.

The course also provides graduates with the application requirements for Civil Aviation Safety Authority (CASA) industry licences – the Remote Pilot Licence (RePL) and the Aeronautical Radio Operator’s Certificate (AROC). Graduates will be guided through the process to obtain these essential licences.

The course not only provides a nationally accredited qualification but is conducted by current industry professionals who operate drones as part of a successful commercial enterprise.